4.3L GM PASSENGER + TRUCK, C.I. V/6 - CASTING # ON TOP
CAST #	STUDS	F.I. INT. EYEBROWS	CHAMBER SHAPE	VALVE SIZE	SENSORS	PART #
258, 268, 245	PRESS	NO	BARN	11/32	1 WET	CF2434
039, 553
768, 683, 248	PRESS	NO	BARN	11/32	1 WET	CF2435
					2 ACESS. BOLTS	(2BOLT)
067, 050, 006	SCREW	NO	BARN	11/32	2 WET	CF2439-1
996
067	SCREW	NO	BARN	11/32	1 WET, 1 DRY
066				3/8 EX.		CF2439-5
064, 066, 103	PRESS	YES	BARN	11/32	1 WET, 1 DRY	CF2436-1
064, 066, 626	SCREW	YES	BARN	11/32	1 WET, 1 DRY	CF2439-6
064, 067, 103	PRESS	NO	BARN	11/32	1 WET, 1 DRY	CF2436
					OR 1 WET
064, 067, 103	SCREW	NO	BARN	11/32	1 WET, 1 DRY	CF2437
					OR 1 WET
064, 103, 209	SCREW	YES	BARN	11/32	2 WET	CF2431
181					OR 1 DRY
064, 103, 209	PRESS	YES	BARN	11/32	2 WET	CF2430
181					OR 1 DRY
115	PRESS	NO	BARN	11/32 INT.	1 WET	CF2439-7
				3/8 EX.
115	SCREW	NO	BARN	11/32 INT.	1 WET	CF2439-2
				3/8 EX.
070	SCREW	NO	BARN	11/32 INT.	1 WET, 2 WET	CF2439-3
				3/8 EX.	OR 1 WET, 1 DRY
209	SCREW	NO	BARN			CF2439-4
140, 772, 107	SCREW	NO	VORTEC HEART	11/32	1 OR 2 WET	CF2438
113, 114	10MMX1.5	NO	VORTEC HEART	11/32	1 WET
	SCREW		NON ROLLER R/A
113,114	BDR	NO	VORTEC HEART	11/32	1 WET	CF2439
	8MMX125		ROLLER R/A
114,113	BDR	NO	VORTEC HEART	11/32	1 WET	CF2439
	8MMX125
NOTE - PRESS IN STUDS HAVE ADJ. R/A W/STD THREADS 3/8 24, RAIL STYLE R/A (R973 S/P)
NON-VORTEC ENGS. SCREW IN STUDS HAVE NON-ADJ. R/A W/METRIC THREADS, 8MM X 125
TOP, 10MM X 150 BOTTOM (R1121 S/P)
G180 & G200Z ISUZU & GM HEAD CHART, P.U., I-MARK, TROOPER, IMPULSE, S10, S15
G180 ENGINE
YEAR	CASTING #	FUEL SYSTEM	SMOG	INT. VALVE	PART #
76-85	NONE	CARB. W/MANUAL F/P	NO	1.588	CF2183-1
76-85	NONE	CARB. W/ELECTRIC F/P	NO	1.588	CF2183-2
76-85	NONE	CARB. W/ELECTRIC F/P	4 HOLES	1.588	CF2183
G200Z ENGINE
82-87	#G200	CARB. W/MANUAL F/P	NO	1.588	CF2191
82-87	#G200	CARB. W/ELECTRIC F/P	NO	1.588	CF2191-1
82-87	#G200	CARB. W/MANUAL F/P	4 HOLES	1.588	CF2197
82-87	NONE	IMPULSE F.I. W/ELECTRIC F/P & SMALL COMBUSTION CMBR	4 HOLES	1.673	CF2194
NOTES:
CF2183 CAN BE MADE INTO CF2197 BY DRILLING F/P HOLE.
THERE ARE SEVERAL DIFFERENT WATER OUTLET NECKS ON THE FRONT OF THESE HEADS. THEY
CAN BE CHANGED TO SUIT THE APPLICATION. RECOMMEND USE OF LOCTITE WHEN CHANGING.